Installation
With our Mud Control Grids, we make life easier on your farm, on your animals, on you, and on the earth.
Grid as New Mud Control Grids
Minimal Ground Prep
01
Minimal ground prep is needed. Level the ground by flattening peaks and filling large holes. Lay down the first row of Mud Control Grids across the full length of the area to be covered.
Important: Leave an expansion gap of at least 1/4” (0.5 cm). Space should also be left between the grids and buildings or edging structures.
Stagger the Rows
02
The second row of grids should be staggered against the first by using a half grid at the beginning. Grids can be easily cut by skill saw.
Cutting: Mud Control Grids are easily cut with skill saws, bench saws, panel saws or jig saws.
Inserting: When laying down Mud Control Grids, a crowbar or shovel can give helpful leverage – but do not apply too much force. The grids should fit loosely together to avoid high tensions during extreme hot or cold weather.
Adding More Traction
03
Once the grids have been laid out, fill the holes with washed sand or another water-permeable material. For general use, but especially with all-season open stabling, we recommend a finishing layer (e.g. riding arena sand or wood chips) of at least 1 1/4” (3 cm).
Making Mud a Memory....
HEAVY DUTY GROUND GRIDS
Mud Control Grids interlink securely and require little to no substructure, this ensures fast and easy installation of a stable area, anywhere you find mud is a problem.
VERY ADAPTABLE TO YOUR NEEDS
Grid as New slabs stay on top of the mud, and can be lifted and moved anywhere, or leave them in place for years. This allows you to change and adapt your mud-free areas at will. This investment is rock solid and will maintain their value and use for years to come.
MINIMAL IF ANY GROUND PREPARATION
If you can level the area by filling any holes and removing larger stones, then lay the Grid as New grids down. No substrate is usually required, just match the grids together to create amazing stability in minutes, even on top of the worse, boot-sucking sloppy mud, these are the sub-base and base all in one product.
Made for a variety of uses
- Made from 100% recycled plastic
- No ground prep work needed
- Guaranteed for 20 years
- Can be laid right on top of muddy areas with minimal if any groundwork preparation required
- Anti-slip design with ideal aperture size for horses, cows, goats, sheep, and more.
- Excellent water drainage through the surface
- Durable, non-rotting and weather resistant
- Suitable for up to 56 tons
- Frost and UV-resistant
- Low maintenance and cost effective throughout the product life
- Interlocking design enables easy and quick installation
- Easy to extend or remove at any time
- Define expectations
- Mark an area
- Measure amount of grids needed
- Order & Delivery
- Install (fastest part!)
- Happy Feet
- Happy Hooves
- No more BOOT SUCKING MUD!
Before & After
Check out all the amazing reviews!
"After years of looking at these and wondering if they were worth the price I bought some...best decision I made...we no longer have boot grabbing mud and my horses are loving them!"
"I think we’re on pallet number 6, but I remember pallet number 1, and I knew from then on, these little pieces of plastic were going to change our lives!"
"So excited to get another pallet of Mud Control Grids, they have changed not only the lives of our horses, but also ours."
“What a great experience. High-quality products, professional customer service and delivery, a real pleasure. Not a single delay or unexpected cost, we have happy horses now!”
